HERMETIC Stout

Flooring System

HERMETIC Paramount Floor is a high build double broadcast system using silica quartz aggregate and seated with a pigmented top coat.
TYPICAL AREAS OF USE
• Commercial kitchens
• Public rooms
• Locket rooms
• Wet or dry processing areas
• Automotive service area
• Medical
• Educational
• Warehouses
• Manufacturing areas

ADVANTAGES

• Ease of maintenance
• increased slip resistance in wet areas
• Hard with excellent abrasion resistance
• VOC free - CA 01350 air quality compliant
• Excellent stain & chemical resistant
• Anti-microbial, seamless & hygienic
• Fast set available for quicker turn around time
• Wide array of colors

SPECIFICATION OVERVIEW

• Name: HERMETIC Paramount Floor
• Cured Thickness: 115 to 125 mils
• Surface preparation and detailed application instructions per manufacturer
• Manufacturer: Elite Crete Systems, Inc. +1-219-465-7671
SAMPLE COLOR CHART
Light Gray Medium Gray Dark Gray
Tan Brown White
Black Forest Green Country Blue
Army Green Tile Red Burnt Orange
Nevada Clay Safety Yellow Brick Red

NOTE: The colors depicted on this technical document may not illustrate the exact color. Contact a technical support representative for a more accurate color sample. Custom colors available upon request • Novalac Only

PHYSICAL PROPERTIES
(73F’ / 23 C, 7 day ambient cure as a coating)

PROPERTY TEST RESULT
VOC Content N/A 0.94
Shore D Hardness ASTM D-2240 80 to 82
Water Absorption (2hr boil) ASTM D-570 0.04%
Toxicity N/A None
Heat Distortion Temperature ASTM D-648 128 F / 53 C
Compressive Strength ASTM D-695 12500 psi
Tensile Strength ASTM D-638 3300 psi
Flexural Strength ASTM D-790 4700 psi
Abrasion Resistance ASTM D-4060 17 mg loss
Slant Shear ASTM C-882 100% concrete failure
Flammability ASTM D-635 Self extinguishing
Flame Spread Rate (NFPA 101) ASTM E-84 Class A
Elongation at Break ASTM D-638 4.2 %
Chemical Resistance Contact technical representative for chart
Coefficient of Friction Adjusted per requirement. Generally 0.80
COF Guidelines ADA Flat Surfaces 0.60
ADA Indined Surfaces 0.80
OSHA 0.50
NFPA 0.68

• FDA & USDA Acceptable •• CS-17 Wheel. 1 KG load, 1,000 cycles

Elite Crete Systems
Elite Crete Systems, Inc.
1061 Transport Drive
Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Toll Free: 888-323-4445
Email: [email protected]